Forklift Gantry Welding Robot Workstation

Quick Inquiry

- 1. Each device is equipped with a set of three-axis welding positioners, which can make the workpiece rotate around its own center line within the range of ±180°, and can also turn the workpiece as a whole, and freely transfer between manual welding and automatic welding stations;

- 2. Each positioner contains two stations: robot automatic welding and manual welding. The CNC system can open or close some automatic welding programs, and allocate the workload of robots and manual welding according to production conditions;

- 3. The pneumatic clamps on the positioner workbench can adapt to workpieces of different widths and lengths, automatic clamps, and automatic locking;

- 4. The pneumatic clamps use thin-walled cylinders to minimize the space occupied by the cylinders and are equipped with infinite rotary joints on the air path. The air pipe is not entangled when the positioner is turned over

Application

Used for the welding process of the inner and outer gantry of forklifts

Online Chat Leave Message

Introduction

The forklift gantry welding robot workstation is used for the welding process of the inner and outer masts of forklifts. Its main features are as follows:

1. Each device is equipped with a set of three-axis welding positioners, which can make the workpiece rotate around its own center line within the range of ±180°, and can also turn the workpiece as a whole, and freely transfer between manual welding and automatic welding stations;
2. Each positioner contains two stations: robot automatic welding and manual welding. The CNC system can open or close some automatic welding programs, and allocate the workload of robots and manual welding according to production conditions;
3. The pneumatic clamps on the positioner workbench can adapt to workpieces of different widths and lengths, automatic clamps, and automatic locking;
4、The pneumatic clamps use thin-walled cylinders to minimize the space occupied by the cylinders, and are equipped with infinite rotary joints on the air path. The air pipe is not entangled when the positioner is turned over;
5. The robot welding part is located in the board room with curtains, equipped with a dust collection system to absorb welding fumes. The lower baffle of the board room can be turned over with the positioner, and the dust collection effect is not affected by the turning;
6. The time for the gantry welding station can be shortened to 20-30 minutes per unit.

Product Recommendations

Forklift Mast Straightening Machine
The forklift mast straightening machine is used to correct the inner and outer masts of forklifts. Its main features are as follows:
Deburring And Slag Removal Machine
Deburring and slag removal machine is mainly used to remove residual slag and burrs on flat metal plates after plasma and flame cutting of medium and thick plates in the sheet metal industry.
H-beam Cantilever Gantry Welding
Different arc guides are selected according to different workpiece types, which can adapt to H-beams with larger flange plate depth. It can be welded with a single head or multiple heads at the same time. It can be equipped with submerged arc welding single wire welding or double wire welding.
Container And Corrugated Board Welding Machine
This special machine is secondary developed on the basis of the five-axis robot CNC system, using laser scanning, embedded batch teaching program, five-axis interpolation linkage, and can weld wavy workpieces such as containers and corrugated boards.

Product Center

Welding and Polishing

Quick Inquiry

Forklift Gantry Welding Robot Workstation

Introduction

Product Recommendations

Interested in our products?