Forklift Mast Straightening Machine

- 1. Each set of hydraulic straighteners contains a set of hydraulic correction devices, which can take into account both inward and outward correction;
- 2. The hydraulic system adopts an ultra-high pressure hydraulic system to provide sufficient correction force;
- 3. The correction cylinder and operating handle are made into one piece, which is convenient for observation and operation. At the same time, a gravity balancer is configured to balance the gravity of the hydraulic correction device to reduce the labor intensity of workers;
- 4. A ruler with obvious scale is set on the correction fixture so that workers can grasp the correction amount;

Application

Used for the correction of the inner and outer masts of forklifts

Online Chat Leave Message

The forklift mast straightening machine is used to correct the inner and outer masts of forklifts. Its main features are as follows:

1. Each set of hydraulic straighteners contains a set of hydraulic correction devices, which can take into account both inward and outward correction;
2. The hydraulic system adopts an ultra-high pressure hydraulic system to provide sufficient correction force;
3. The correction cylinder and the operating handle are made into one piece, which is convenient for observation and operation. At the same time, a gravity balancer is configured to balance the gravity of the hydraulic correction device to reduce the labor intensity of workers;
4. A ruler with obvious scales is set on the correction fixture so that workers can grasp the correction amount;
5. A set of flip positioners is configured to flip the work piece within a range of 180°;
6. The pneumatic clamps on the workbench of the positioner can adapt to work pieces of different widths, and the distance between the clamps is adjusted by bolts;
7. The pneumatic clamps use thin-walled cylinders to minimize the space occupied by the cylinders. Infinite swivel joints are installed on the air path, and the air pipes are not entangled when the positioner is flipped; 8. Use a remote-controlled pneumatic lifting trolley to take the work piece from the workbench of the positioner and drive it out of the correction station;
9. The time required for the gantry correction station can be reduced to 3~4 minutes.

Positioner
变位机是专用焊接辅助设备，适用于回转工作的焊接变位，以得到理想的加工位置和焊接速度。
Roller Carrier
Roller carrier refers to the use of friction between the weldment and the active roller to drive the circular weldment to rotate to complete the welding of the annular weld.
Forklift Gantry Welding Robot Workstation
The forklift gantry welding robot workstation is used for the welding process of the inner and outer masts of forklifts.

Product Center